Main

Kobe Aluminum Automotive Products to expand production of aluminum forged suspension products

Nov. 4, 2015


Mitsui & Co., Ltd.
Kobe Steel, Ltd.
Toyota Tsusho Corporation


Main Contents

Mitsui & Co., Ltd. is pleased to announce that its U.S. joint venture, Kobe Aluminum Automotive Products, LLC ("KAAP"), will expand its production facility to meet the growing demand in North America for aluminum forged suspension products. KAAP will invest approximately $56.6 million in capital investments. Start-up of the new production equipment is anticipated to begin in 2017.

KAAP will install an additional melting and casting line and two forging presses. The expansion will increase production capacity up to 750,000 pieces per month. The investment also includes the acquisition of adjacent land and the construction of an additional building to house the new equipment, while looking ahead to further potential expansion in the future. About 100 people are anticipated to be hired.

By making cars lighter, aluminum suspensions contribute to improving fuel efficiency. KAAP was established as a joint venture in 2003 by Kobe Steel, Mitsui & Co., Ltd. and Toyota Tsusho Corporation to produce aluminum forged suspension products in North America. Production began in 2005. Celebrating its 10th anniversary in May this year, KAAP has steadily expanded production to meet the rising demand for aluminum forged suspension products owing to the increasing need for lighter vehicles. With two melting and casting lines and six forging presses currently in operation, KAAP has the top market share for aluminum forged suspension products in North America.

In North America, the world's second-largest automobile market, car production is anticipated to continue growing. Estimated production of about 17.5 million cars in 2015 is projected to increase to 19 million cars in 2020. The need for lighter vehicles will accelerate as cars and light-duty trucks will be required to increase fuel efficiency to meet stronger Corporate Average Fuel Economy (or CAFE) standards.

Not to miss this opportunity, the new enlarged production facility will contribute to solidifying KAAP's top position in the aluminum forged suspension products market in North America.

Outline of the Facility Expansion

Land area 120,000 sq m (1,292,000 sq ft)
Area of new building 10,800 sq m (116,200 sq ft)
Equipment 1 melting and casting line, 2 forging presses, auxiliary equipment
Investment amount About $56.6 million
No. of employees to be hired About 100 (when in full operation)
Start-up To begin sequentially from spring 2017

Please scroll horizontally to look at table below.

  Current New Addition Total
Land area 130,000 sq m
(1,399,000 sq ft)
120,000 sq m
(1,292,000 sq ft)
250,000 sq m
(2,691,000 sq ft)
Buildings 22,500 sq m
(242,200 sq ft)
10,800 sq m
(116,200 sq ft)
33,300 sq m
(358,400 sq ft)
Melting & casting lines 2 1 3
Forging presses 6 2 8

Profile of Kobe Aluminum Automotive Products, LLC

Location Bowling Green, Kentucky, USA
Established May 2003
President Toshihiro Katsura
Employees About 400
Capital $24 million
Shareholder composition Kobe Steel, Ltd. 60%
Mitsui & Co., Ltd. 25%
Toyota Tsusho Corporation 15%

Notice:
This announcement contains forward-looking statements. These forward-looking statements are based on Mitsui's current assumptions, expectations and beliefs in light of the information currently possessed by it and involve known and unknown risks, uncertainties and other factors. Such risks, uncertainties and other factors may cause Mitsui's actual results, financial position or cash flows to be materially different from any future results, financial position or cash flows expressed or implied by these forward-looking statements. These risks, uncertainties and other factors referred to above include, but are not limited to, those contained in Mitsui's latest Annual Securities Report and Quarterly Securities Report, and Mitsui undertakes no obligation to publicly update or revise any forward-looking statements.
This announcement is published in order to publicly announce specific facts stated above, and does not constitute a solicitation of investments or any similar act inside or outside of Japan, regarding the shares, bonds or other securities issued by us.

Information

For inquiries on this matter, please contact

Mitsui & Co., Ltd.
Corporate Communications Division
Akihiro Tamo
Telephone: +81-3-3285-6645
Facsimile: +81-3-3285-9819